Andrew Wireless System M78517E19P Manuel D’Utilisation

Page de 55
 
1. General
 
Page 6 
 
MF0150A2A.doc                             Manual for ION-M7P/85P/17EP/19P 
 
1.2. Health  and  Safety 
 
1.  Danger: Electrical hazard. Danger of death or fatal injury from electrical 
current. Obey all general and regional installation and safety regulations 
relating to work on high voltage installations, as well as regulations 
covering correct use of tools and personal protective equipment. 
2.  Danger: Electrical hazard. Danger of death or fatal injury from electrical 
current inside the unit in operation. Before opening the unit, disconnect 
mains power.
 
3. Caution: Laser radiation. Risk of eye injury in operation. Do not stare into the 
beam; do not view it directly or with optical instruments. 
4. Caution: High frequency radiation in operation. Risk of health hazards associated 
with radiation from the unit’s inner conductor of the antenna port(s). Disconnect 
mains before connecting or replacing antenna cables. 
5. Caution: High frequency radiation in operation. Risk of health hazards associated 
with radiation from the antenna(s) connected to the unit. Implement prevention 
measures to avoid the possibility of close proximity to the antenna(s) while in 
operation.  
 
1.3. Property Damage Warnings 
1. Attention: Due to power dissipation, the remote unit may reach a very high 
temperature. Do not operate this equipment on or close to flammable materials. 
Use caution when servicing the unit.  
2. Attention: Only authorized and trained personnel are allowed to open the unit 
and get access to the inside. 
3. Notice: Although the Remote Unit is internally protected against overvoltage, it is 
strongly recommended to ground (earth) the antenna cables close to the antenna 
connectors of the Remote Unit for protection against atmospheric discharge. In 
areas with strong lightning, it is strongly recommended to install additional 
lightning protection. 
4. Notice: ESD precautions must be observed. Before commencing maintenance 
work, use the available grounding (earthing) system to connect ESD protection 
measures. 
5. 
Notice: Only suitably qualified personnel are allowed to work on this unit and only 
after becoming familiar with all safety notices, installation, operation and 
maintenance procedures contained in this manual.
 
6. Notice: Keep operating instructions within easy reach and make them available 
to all users.