Technologies Humanware Inc. APBT320 Manuel D’Utilisation
BrailleNote Apex QT User Guide
14-315
Press Y for yes and this happens automatically. After the first time you won't hear this prompt
again.
again.
2. KeySoft prompts:
"Entry list for connection configurations." To go to the first field, press
SPACE.
3.
"Connection configuration name?" Enter a name for the record that is meaningful to you, then
press ENTER.
4.
"Device to use? (name)." Dialup only - if using networking, select the device to use (such as,
ethernet if you are accessing a network via the ethernet port) and then go to step 9. If you are
not using Dialup only, this is where you specify the device through which you are making the
connection, such as a type of modem. Select the device you want by pressing ENTER. To cycle
through the list, press CONTROL with SPACE and make a selection by pressing ENTER.
not using Dialup only, this is where you specify the device through which you are making the
connection, such as a type of modem. Select the device you want by pressing ENTER. To cycle
through the list, press CONTROL with SPACE and make a selection by pressing ENTER.
5.
"Phone Number?." For dialup connections only. If using in a work environment, remember to
add any dialout prefix to the number.
6.
"Service User name?." This is the user name you use to get onto the internet via your ISP.
Type it here. Likewise the
"Service Password?."
7. For the rest of the prompts, leave them set to their default unless otherwise stated in 14.6.3
8. For dialup connections only: When you are happy with all the settings, add this configuration
by either pressing CONTROL with ENTER, or ESCAPE then Y at the
"Save this record?"
prompt. The rest of this procedure applies to networking configurations only.
9. The rest of the fields relate to networking using a LAN. As discussed in 14.6.2 Using a LAN
connection, you may not need to fill in all, or even any of them, depending on the way in which
the network is set up.
the network is set up.