Manualsbrain.com
  1. Manuels
  2. Marques
  3. Technologies Humanware Inc.
  4. APBT320
  5. Manuel D’Utilisation

Technologies Humanware Inc. APBT320 Manuel D’Utilisation

Télécharger
Page de 538
BrailleNote Apex QT User Guide 
 
2-48 
 
 
Important: Before using the USB client connection for the first time, you will need to install a 
special driver on your computer to enable communication. The installation steps are described in 
the following sections.  
 
2.8.1 
USB Client driver installation on XP. 
In order to establish a USB Client connection with a computer, you will need to first install a 
special driver. Please follow instructions carefully.  
1.  Insert CD-ROM into your CD drive.  
2.  On your Apex, select the USB Client connection and press "Enter" (see Braille Terminal for 
Screen Reader section in your Keysoft user guide).  
3.  Plug your USB cable between Apex and PC.  
4.  On your PC, the Found New Hardware Wizard window appears.  
5.  Select "No, not this time" and press "Next" Button.  
6.  Select "Install from a list or specific location (Advanced)" and press "Next" Button.  
7.  Press Tab once to select "Include this location in the search" and press Space to check the check 
box.  
8.  Press Tab again and press Enter on the "Browse" button.  
9.  Select the CD-Rom drive and the folder ApexPCDrivers\x86 for 32 bits PC, otherwise select 
x64 and press Enter.  
10.  Select the "Next" button.  
11.  In the "Hardware Installation" window press "Continue Anyway" button.  
12.  In the "Found New Hardware" window press "Finish" button to complete installation.  
13.  Windows has finished installing Apex driver.  
14.  In Start menu go to Settings/Control Panel and open System.  
15.  In System Properties window select "Hardware" tab and press "Device Manager" button.  
16.  In the Device Manager window, open Ports (COM & LPT) and select Apex Virtual USB COM 
Port 1 (COMX).  
17.  Note the COMX value, this is the COM port value to set in the screen reader.  
18.  Close Control Panel, Device Manager and System Properties windows.  
19.  In your Screen Reader, enter the COM port value previously noted.  
20.  Apex displays Screen reader information.  
21.  To exit the Braille terminal mode, press ESCAPE.