Trane US Inc. ZONE950B Manuel D’Utilisation

22  

This screen is used to manage how the control obtains network addresses and is needed when DHCP (Dynamic Host Configuration Protocol) has 
been turned off or is not available on the router. Otherwise, you may use DHCP to automatically obtain this information. This manual configuration is 
required if a static IP address is desired.

NOTE: No additional configuration may be required in a non-broadcast network where IP addresses are assigned by DHCP. You may connect to the 
network without modifying the Host Settings.

3)  Enter the IP address as required for each.

4)  To manually select a DNS server, enter IP 

address(es). 

1)  Select the “Host Settings” button to access 

the second screen of settings in this 

vanced Network Settings menu.

2)  Select IP Address, Gateway and Subnet 

Mask buttons as required.

5)  After all the addresses are assigned, Con-

nect to the network.

6)  To change a Static IP Address to a DHCP Ad-

dress, press “Release and Renew IP Address”.