Nxp Semiconductors JN5169U0 Manuel D’Utilisation
NXP Semiconductors
UM10929
JN5169-USB-Dongle User Manual
UM10929
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2014. All rights reserved.
User manual
Rev. 1.1
— 30 November 2015
3 of 14
1. Introduction
This chapter introduces the NXP JN5169 USB Dongle (DR1198), which provides a
hardware development platform for wireless microcontroller applications with a USB
interface.
hardware development platform for wireless microcontroller applications with a USB
interface.
1.1 Overview
The JN5169 USB Dongle features a JN5169 wireless microcontroller and allows
communication with this JN5169 device from a USB connection. The JN5169 device can
act as a node of a wireless network. Thus, the dongle provides an easy way of
interfacing a host machine (such as a PC) to a wireless network based on the
IEEE802.15.4, ZigBee Smart Energy or ZigBee-Home Automation networking protocol.
An FTDI device provides the USB connection between the host machine and the JN5169
device, which in turn provides the radio interface to the wireless network.
communication with this JN5169 device from a USB connection. The JN5169 device can
act as a node of a wireless network. Thus, the dongle provides an easy way of
interfacing a host machine (such as a PC) to a wireless network based on the
IEEE802.15.4, ZigBee Smart Energy or ZigBee-Home Automation networking protocol.
An FTDI device provides the USB connection between the host machine and the JN5169
device, which in turn provides the radio interface to the wireless network.
Typical uses of the dongle include:
A complete and stable hardware environment for the development of
IEEE802.15.4, ZigBee Smart Energy and ZigBee-Home Automation networking
applications, facilitating an accelerated time-to-market for wireless network
products
applications, facilitating an accelerated time-to-market for wireless network
products
The basis of a packet sniffer for IEEE 802.15.4-based wireless communications
A means of integrating the host machine into a wireless network, typically as the
network Coordinator
The small-footprint PCB of the dongle provides all the necessary components for a
wireless microcontroller with access to a USB connection. All RF layout and decoupling
issues are handled by the design of this dongle. Therefore, this design is ready for
application development without the necessity of hardware development.
wireless microcontroller with access to a USB connection. All RF layout and decoupling
issues are handled by the design of this dongle. Therefore, this design is ready for
application development without the necessity of hardware development.
, is supplied in the JN5169-EK004 Evaluation Kit.
Fig 1.
JN5169 USB dongle (DR1198)