Shenzhen AEE Technology CO. LTD. AEEAP100001 Manuel D’Utilisation
AEE
Aerial Photography Equipment
Professional·Advanced
- 6 -
Install Propellers
There are two clockwise propellers and two counter-clockwise propellers. The propeller caps have two colors: black
and silver. Propellers with black caps are clockwise propellers which should be installed on support arms with “P”
mark. The clockwise propellers should be installed on the left front and right rear support arms of the aerial
photography equipment.
Wrong installation of clockwise and counter-clockwise propellers will inevitably result in errors in the lift
system of the aerial photography equipment, further leading to unpredictable consequences.
1. Place the propellers with black caps on the support arms with “P” mark, and tighten the propellers
counter-clockwise; place the propellers with silver caps on the support arms without “P” mark, and tighten the
propellers clockwise.
2. To remove a propeller, use a hand or auxiliary wrench to make the motor seize up (see the figure below) and
stop rotating; grasp the propeller; rotate the propeller with black cap clockwise to remove the propeller; rotate the
propeller with silver cap counter-clockwise to remove the propeller.
Propeller
Airborne camera
Motor
Undercarriage
Right front light
(green)
Left front light
(green)
Right rear light
(red)
Left rear light
(red)
TF card slot
Tail light (red)
Battery door
Power switch
Propeller guard