Chervon Trading Co. Ltd KBTS124B-03 Manuel D’Utilisation

9

6.  Connecting to Bluetooth 
a.  Press and hold the ON/OFF button (A) approximately 3 seconds to turn the Bluetooth 

speaker on. The speaker will default to Bluetooth pairing mode, and the indicator (E) will 

flash blue light continuously. 

b.  If previously paired to the desired device, the speaker will automatically reconnect to the 

same device when the speaker is turned on.

c.  If no Bluetooth device was previously paired, the speaker will continue to search for a 

signal for 10 minutes.

d.  Once the device has successfully paired with the speaker, use the device controls to move 

through tracks and to control volume.

e.  To pair the speaker to a different device, press and hold the Bluetooth pair button (D) for 3 

seconds until the indicator light flashes. The speaker will then be in Bluetooth pair mode 

and can be connected to a different device. Consult the instructions for your device.

7.  Connecting to AUX Device 
a.  Insert the plug of audio wire into the audio IN jack (I), and make sure that they are properly 

connected.

b.  Press and hold the ON/OFF button (A) approximately 3 seconds to turn the Bluetooth 

speaker on. The speaker will be in AUX mode and the indicator (E) will illuminate a blue 

light.

c.  Connect an MP3 player, CD player, or other audio device directly to the speaker, using the 

audio wire.

NOTE: In the absence of a connection to an audio wire, the speaker will enter into the 

Bluetooth pairing mode. When connected to an audio wire, the speaker will change from 

Bluetooth pairing mode to audio mode.

 All maintenance should only be carried out by a qualified service technician.

•  To reduce the risk of personal injury and damage, never immerse your speaker, battery pack or 

charger in liquid or allow a liquid to flow inside them.

Cleaning
Before cleaning or performing any maintenance, remove the battery from the Bluetooth 

speaker. For safe and proper operation, always keep the Bluetooth speaker clean.
Always use only a soft, dry cloth to clean the Bluetooth speaker never use detergent or 

alcohol. Clean dust and debris from vents. Keep the speaker handle clean, dry and free of oil 

or grease.
Never use flammable or combustible solvents around tools.