Essence Security International ltd. ES6500EGE Manuel D’Utilisation
Operation
16
EverGuard Express
Figure 4: EverGuard Express panel Bottom View
Figure
5: EverGuard Express panel bottom view
Note: Timeout between programming steps is 60 seconds.
To access the Programming mode:
1. To get the Programming tool, holding the EverGuard Express panel, separate
the back component from the front. The inside is exposed.
2. Remove the Programming tool from its niche.
3. Locate the Programming button on the bottom of the front panel (see table 1
#8).
4. Insert the Programming tool point into the Programming button. The Status
LED flashes red and one good beep sounds.