Essence Security International ltd. ES7000EG Manuel D’Utilisation
Installation
14
EverGuard Control Panel
4. Place the GSM/GPRS modem so that the screw holes line up with the
screw holes protrusions.
Note: Be careful not to not to disconnect the antenna while performing
this function. Antenna disconnection causes a fault in the system when
trying to connect to the GSM network.
this function. Antenna disconnection causes a fault in the system when
trying to connect to the GSM network.
5. Push down so that the Board-to-Board IDE Connectors match up and
connect.
6. Using the appropriate screwdriver, attach the three screws so that the
Modem Connector is securely fastened to the modem board.
Note: Use the screws supplied with the modem kit. Unspecified screws can
damage the GSM/GPRS Modem Hardware as well as its functionality.
damage the GSM/GPRS Modem Hardware as well as its functionality.