Handheld Group AB 1127824 Manuel D’Utilisation
Ver 1.0
3
Copyright Notice
Copyright © 2012 Handheld Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced,
copied, translated, or transmitted in any form or by any electronic or mechanical means, for any purposes
without the permission of the original manufacturer in advance.
copied, translated, or transmitted in any form or by any electronic or mechanical means, for any purposes
without the permission of the original manufacturer in advance.
Trademark Acknowledgement
Brand and product name are trademarks or registered trademarks of their respective owners.
Disclaimer
Handheld Inc. reserves the right to make any product changes without notice, including circuits and/or
software described or contained in this manual in order to improve product design and/or performance.
Handheld Inc. assumes no responsibility or liability for the use of the described product(s), conveys no license
or title under any patent, copyright, or masks work rights to these products, and makes no representations or
warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration purposes only. Handheld
Inc. makes no representation or warranty that such application will be suitable for the specified use without
further testing or modification.
software described or contained in this manual in order to improve product design and/or performance.
Handheld Inc. assumes no responsibility or liability for the use of the described product(s), conveys no license
or title under any patent, copyright, or masks work rights to these products, and makes no representations or
warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration purposes only. Handheld
Inc. makes no representation or warranty that such application will be suitable for the specified use without
further testing or modification.
Warranty
Handheld Inc. guarantees that all Handheld products will be free including material and workmanship defects
for one year from the invoice date. If the customer discovers any defects, Handheld will, at its option, repair or
replace the defective product without any charge to customers, and ship the returned product with prepaid
transportation charges during the warranty time of one year. The returned product must be properly packaged
in its original packaging to be qualified for warranty service.
for one year from the invoice date. If the customer discovers any defects, Handheld will, at its option, repair or
replace the defective product without any charge to customers, and ship the returned product with prepaid
transportation charges during the warranty time of one year. The returned product must be properly packaged
in its original packaging to be qualified for warranty service.
If there is a time gap of over 30 days between the date marked on the serial number and the shipping date,
the one-year warranty time will then activate from the shipping date. The third and fourth digits of the serial
numbers stand for the manufacturing year and the fifth digit stands for the manufacturing month (e. g., with A
for October, B for November and C for December). For example, the serial number 1W10Axxxxxxxx means
October of year 2010.
the one-year warranty time will then activate from the shipping date. The third and fourth digits of the serial
numbers stand for the manufacturing year and the fifth digit stands for the manufacturing month (e. g., with A
for October, B for November and C for December). For example, the serial number 1W10Axxxxxxxx means
October of year 2010.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.