Shenzhen Anbash Technology Co. Ltd. NC325PW Manuel D’Utilisation
Obtain an IP address automatically(DHCP):
If your network supports a DHCP server (e.g. router) select this option to have the IP address is assigned
automatically.
If you select Obtain an IP address automatically you should select Obtain a DNS Server address
automatically.
Use the following IP address:
Select this option when a fixed IP is required.
[IP address]
If your network supports a DHCP server (e.g. router) select this option to have the IP address is assigned
automatically.
If you select Obtain an IP address automatically you should select Obtain a DNS Server address
automatically.
Use the following IP address:
Select this option when a fixed IP is required.
[IP address]
Type the IP address of your camera.
[Subnet mask]
Type the subnet mask.
[Default gateway]
Type the default gateway.
Obtain DNS Server address automatically:
If your network supports a DHCP server (e.g. router) select this option to have the DNS Server address is
assigned automatically.
Use the following DNS server address:
[Primary DNS IP address]
Type the IP address of the primary DNS server.
[Secondary DNS IP address]
Type the IP address of the secondary DNS server, if necessary.
[HTTP/RTSP port]
The default HTTP port number is 80, it is also be used as RTSP port.
[RTP port range]
It is for UPnP port forwarding, 1 camera actually use 2 RTP ports, one for video, the other
for audio. (See UPnP setup)
[HTTP/RTSP Authentication method]
[HTTP/RTSP Authentication method]
Select Basic Authentication or Digest Access Authentication.
PPPoE Setup
The camera can be installed without a PC on the network. Some XDSL services use PPPoE
(Point-to-Point Protocol over Ethernet).
(Point-to-Point Protocol over Ethernet).
[PPPoE dial-up]
Enable or disable PPPoE connection.
[Service name]
Either an ISP name or a class of services that is configured on the PPPoE server. This field
may be left empty.
37