Shenzhen Anbash Technology Co. Ltd. NC335SPW Manuel D’Utilisation
67
[Task] Task function.
Click on the task to login the task setting screen below.
Click Apply to confirm your setting
1. Snapshot from---
Select snapshot stream source which
can be “Primary stream” , “Secondary stream” and
“ Mobile Stream” . For smaller pictures you can select from “Secondary stream”.
2. Snapshot Duration--
The number of seconds that the camera should keep sending emails with
attached image
after motion stops.
3. Snapshot Frame Rate--
The number of frames per seconds that the camera should keep sending images at
when
an alarm is triggered.
If “Snapshot duration” had a value of 4 and “snapshot frame rate” had a value of 2,
you would
be getting 2 images each second for 4 seconds in a row, meaning 8 pictures total for each motion
detection event.
4. Alarm Interval--
This is the number of seconds for which the camera should stop sending e-mail alerts
after the
first set. Setting the time to 0 disables this feature. It
allows you to designate a time (in seconds)
during which new
emails are suppressed. For example, if you want to avoid a flood of emails, you could set
this time to 3600 seconds so that after a motion detection event you wouldn’t get any new emails for at least
1 hour.
1 hour.
5.
SMTP server name--Type the name or IP address of the SMTP server you want to use for sending the
e-Mails. Please note that some networks do not allow e-mail relaying. Check with your system
administrator or Internet service provider for more details.
e-Mails. Please note that some networks do not allow e-mail relaying. Check with your system
administrator or Internet service provider for more details.
6.
SMTP server port-- The port number of the e-mail server (default is 25)
7.
Secure SSL connection--Select whether your SMPT server requires an SSL connection.
8.
Authentication--Select whether authentication is required by the SMTP server.
9. User name] & Password--Type the user name and password of the e-mail account you wish to use. This
field is required if your SMTP server requires authentication.
10. Re-type password-- Re-type the password.
11. Sender e-mail address--Type the e-mail address of the account you are using to send the e-mail. This
will be the address the emails come from.
12. Receiver e-mail address--Type the recipients’ e-mail addresses for who you want the emails to be
sent to. Up to 3 addresses can be entered.
13. Subject--Subject of the e-mail that is sent. Entering a relevant subject will help identify the alarm better.
i.e.
“Garage Alarm”
“Garage Alarm”
14. Message--Type the text you wish to appear in the e-mail. E.g. this is to notify you that your alarm
has been triggered.
Notes: Email settings can be obtained from your e-mail service provider. An SMTP email account is required
– these are very common if you use POP3 email and some IMAP servers. A true IMAP server will not work.
– these are very common if you use POP3 email and some IMAP servers. A true IMAP server will not work.
Some ISPs won’t let you use any other SMTP server other than their own (British Telecom BT is a good
example of this).
example of this).
15.
Click Apply to confirm your setting.