TruePath Wireless LLC TPW24-B-4AM Manuel D’Utilisation
CONFIDENTIAL
11 (20)
BTS TPW24-B-4A/M
Version 1.1
SYSTEM USER GUIDE
Date 23 September
2011
11 Copyright © 2011 TruePath Wireless, LLC. All rights reserved. Reproduction in whole or in part without permission is prohibited. Information contained herein is subject to
change without notice. The specifications and information regarding the products in this document are subject to change without notice. All statements, information, and
recommendations in this document are believed to be accurate, but are presented without warranty of any kind, express, or implied. Users must take full responsibility for their
application of any products. Trademarks, brand names and products mentioned in this document are the property of their respective owners. All such references are used
strictly in an editorial fashion with no intent to convey any affiliation with the name or the product's rightful owner.
change without notice. The specifications and information regarding the products in this document are subject to change without notice. All statements, information, and
recommendations in this document are believed to be accurate, but are presented without warranty of any kind, express, or implied. Users must take full responsibility for their
application of any products. Trademarks, brand names and products mentioned in this document are the property of their respective owners. All such references are used
strictly in an editorial fashion with no intent to convey any affiliation with the name or the product's rightful owner.
station configured with the internal 2.4GHz patch antennas, located under the radome
(front view).
(front view).
Figure 5 - Single Band BTS (Front View)
To configure the radio frequency and channel bandwidth, the system is equipped with a
command line interface. This and other operational configuration parameters are
discussed in the following sections.
3. Command Line Interface (CLI)
After the base station and/or client are connected to power and Ethernet, the system
should initially be connected to a computer. NOTE: the Ethernet port is equipped with
auto MDI-X rollover capability.
The default IP address configured as factory default is:
should initially be connected to a computer. NOTE: the Ethernet port is equipped with
auto MDI-X rollover capability.
The default IP address configured as factory default is:
192.168.0.20
3.1
Connecting/First-Time Login
The default user name and password is:
Username: admin
Password: admin
These can be changed from the CLI interface after initial login. It is important to note
that this account can change all aspects of the management system; therefore the
admin password should be changed immediately to avoid a security breach.
that this account can change all aspects of the management system; therefore the
admin password should be changed immediately to avoid a security breach.