MitraStar Technology Corporation DSL2401HNAT1CC Manuel D’Utilisation

Chapter 23    Remote Management

137

Use this screen to set from which IP address the Router will accept DNS queries and on which 

interface it can send them your Router’s DNS settings. This feature is not available when the Router 

is set to bridge mode. Click Maintenance > Remote MGMT > DNS to change your Router’s DNS 

settings.

Figure 100 Maintenance > Remote MGMT > DNS

Get Community

Enter the Get Community, which is the password for the incoming Get and GetNext 

requests from the management station. The default is public and allows all requests.

Set Community

 Enter the Set community, which is the password for incoming Set requests from the 

management station. The default is public and allows all requests.

Trap Community

Type the trap community, which is the password sent with each trap to the SNMP 

manager. The default is public and allows all requests.

IPv4 Trap 

Destination

Type the IPv4 IP address of the station to send your SNMP traps to.

IPv6 Trap 

Destination

Type the IPv6 IP address of the station to send your SNMP traps to.

Table 83   Maintenance > Remote MGMT > SNMP (continued)

Table 84   Maintenance > Remote MGMT > DNS 

Server Port

This displays the service port number for accessing the Router. If the number is grayed 

out, it is not editable.