Teknatool International Limited 55518RX Manuel D’Utilisation
When RX module receives the TX data bag, the Transceiver IC
will demodulate it and transmit it to MCU,MCU also release
controlling instruction to related loading which including LCD
controlling panel MCU and other module MCU. At the same time,
this IC modulates these signals into data bag and wireless
transmits to TX by Antenna.
will demodulate it and transmit it to MCU,MCU also release
controlling instruction to related loading which including LCD
controlling panel MCU and other module MCU. At the same time,
this IC modulates these signals into data bag and wireless
transmits to TX by Antenna.
F. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) The device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation
G. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
For a host using a certified modular with a standard fixed label, if (1) the
module’s FCC ID is not visible when installed in the host, or (2) if the host
is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the module
is visible; then an additional permanent label referring to the enclosed
module: “Contains Transmitter Module FCC ID: ZSG-55518RX” or
“Contains FCC ID: ZSG-55518RX” must be used. The host OEM user
manual must also contain clear instructions on how end users can find
and/or access the module and the FCC ID.
Operation is subject to the following two conditions:
(1) The device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation
G. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
For a host using a certified modular with a standard fixed label, if (1) the
module’s FCC ID is not visible when installed in the host, or (2) if the host
is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the module
is visible; then an additional permanent label referring to the enclosed
module: “Contains Transmitter Module FCC ID: ZSG-55518RX” or
“Contains FCC ID: ZSG-55518RX” must be used. The host OEM user
manual must also contain clear instructions on how end users can find
and/or access the module and the FCC ID.