TCL Technoly Electronics Co. Ltd. SB000014 Manuel D’Utilisation
8
GB
HT-CT180
4-559-026-11(1)
F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB-
HTCT180UC\040SND.fm
HTCT180UC\040SND.fm
masterpage: Left
Enjoying sound effects
To set sound effects, press one of the
sound effects buttons on the remote
control.
sound effects buttons on the remote
control.
Press SURROUND repeatedly during
playback.
The surround effects change cyclically
as follows.
CLEARAUDIO+
playback.
The surround effects change cyclically
as follows.
CLEARAUDIO+
SURROUND On
SURROUND Off
Sound is output at low volume with
minimum loss of fidelity and clarity of
dialog.
minimum loss of fidelity and clarity of
dialog.
Press NIGHT.
The ANALOG indicator flashes twice.
To inactivate the Night mode, press
NIGHT again.
The ANALOG indicator flashes twice.
To inactivate the Night mode, press
NIGHT again.
The Voice mode helps make dialogs
clearer.
clearer.
Press VOICE.
The ANALOG indicator flashes twice.
To inactivate the Voice mode, press
VOICE again.
The ANALOG indicator flashes twice.
To inactivate the Voice mode, press
VOICE again.
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
sound when the system receives a
Dolby Digital multiplex broadcast signal.
Press AUDIO repeatedly.
The channel changes cyclically as
follows.
Main
The channel changes cyclically as
follows.
Main
Sub
Main/Sub
Useful for enjoying movies at low sound
volume. DRC applies to Dolby Digital
sources.
volume. DRC applies to Dolby Digital
sources.
Hold AUDIO and VOICE down
simultaneously for 5 seconds to turn
on or off Dolby DRC.
simultaneously for 5 seconds to turn
on or off Dolby DRC.
Sound Adjustment
Selecting the sound effects
CLEARAUDIO+
The suitable sound setting is automatically
selected for the sound source. The
CLEARAUDIO+ and SURROUND indicators
light up.
The suitable sound setting is automatically
selected for the sound source. The
CLEARAUDIO+ and SURROUND indicators
light up.
SURROUND On
Sounds are played back with surround
effects. The SURROUND indicator lights up.
Sounds are played back with surround
effects. The SURROUND indicator lights up.
SURROUND Off
The input source is down-mixed for 2
channels. The CLEARAUDIO+ and SURROUND
indicators turn off.
The input source is down-mixed for 2
channels. The CLEARAUDIO+ and SURROUND
indicators turn off.
Setting the Night mode
Setting the Voice mode
Selecting multiplex
broadcast sound (Dual
Mono)
broadcast sound (Dual
Mono)
Main
Outputs only the main channel. The OPTICAL
indicator flashes twice.
Outputs only the main channel. The OPTICAL
indicator flashes twice.
Sub
Outputs only the sub channel. The ANALOG
indicator flashes twice.
Outputs only the sub channel. The ANALOG
indicator flashes twice.
Main/Sub
Main sound is output from the left speaker
and sub sound is output from the right
speaker. The OPTICAL and ANALOG
indicators flash twice.
Main sound is output from the left speaker
and sub sound is output from the right
speaker. The OPTICAL and ANALOG
indicators flash twice.
Setting Dolby DRC (Dynamic
Range Control)
Range Control)
On
Compresses sound in accordance with the
information contained in the content. The
ANALOG indicator flashes twice.
Compresses sound in accordance with the
information contained in the content. The
ANALOG indicator flashes twice.
Off
Sound is not compressed. The OPTICAL
indicator flashes twice.
Sound is not compressed. The OPTICAL
indicator flashes twice.
010COV.book Page 8 Thursday, September 18, 2014 5:01 PM