DA HAAM e-TEC Co. Ltd. EVP-71MT Manuel D’Utilisation
22
Do not touch the LCD screen as this may scratch it or dirty it.
Be careful not to place anything between the display and the main body when the
display is opening or closing. If an object gets between the display and main body, the
display may stop working.
About the Liquid Crystal Display (LCD) Screen
If the display is near the vent of an air conditioner when it is deployed, make sure that
air from the air conditioner is not blowing on it. Heat from the heater may break the
LCD screen, and cool air from the cooler may cause moisture to form inside the display
resulting in possible damage. Also, if the display is cooled down by the cooler, the
screen may become dark, or the life span of the small fluorescent tube used inside the
display may be shortened.
Small black dots or white dots(bright dots) may appear on the LCD screen. These are
due to the characteristics of the LCD screen and do not indicate a problem with the
display
At low temperatures, the LCD screen may be dark for a while after the power is turned
ON.
The LCD screen will be difficult to see if it is exposed to direct sunlight.
Keeping the Display in Good Condition
When removing dust from the screen or cleaning the display, first turn the system power
OFF, then wipe with a soft dry cloth.
When wiping the screen, take care not to scratch the surface. Do not use harsh or
abrasive chemical cleaners.