Vanu Inc. 0PW2P0010 Manuel D’Utilisation
Vanu Anywave BSS Operator Guide — DRAFT
2.6
Power Rectifier
The Power Rectifier used in a typical deployment converts 120 Volt AC current to 27 Volt DC current,
making it possible for the MCPAs to be powered by an AC power source. The Power Rectifier’s ability to
hold up to three power modules makes it easy to swap out an existing power module or add a new one as
necessary for increased DC power.
making it possible for the MCPAs to be powered by an AC power source. The Power Rectifier’s ability to
hold up to three power modules makes it easy to swap out an existing power module or add a new one as
necessary for increased DC power.
The Power Rectifier used in your deployment will have one power module. Each MCPA has two power
connections: +27V DC (red) and the Return (black) to the rectifier being used in the system. Each
power module in the rectifier requires its own 120 Volt power source.
connections: +27V DC (red) and the Return (black) to the rectifier being used in the system. Each
power module in the rectifier requires its own 120 Volt power source.
Figure 2.6: Powerwave Power Rectifier
13