NETSCOUT Systems Inc. AM5010-001 Manuel D’Utilisation

3

3.  For WLAN, open the WLAN client utility. Click  Configuration tab. Type default SSID (default

SSID: wireless) in the Network Name field. Choose  “Access Point” for Network Type, then

click OK button.

Note: the default channel is 6.Configuring the Router through Web Browser

The access point can be configured through your web browser with the Web-Based Utility.

Open your web browser and type the default IP address of the AP in the address field (default IP:

192.168.1.1) and press Enter. Make sure the IP address of AP and your computer are in the same

subnet.

After the connection is established, you will see the User Login page as shown below. Leave

the password field blank when the first time you open the Web-Based utility. You can change the

password on the “Administrator settings” page.

The system will be time out after idling about 1 minute. You have to login again to re-enter the

main setting page. You can change the idle time out period on the “Administrator settings” page.

On any page, you can click  HELP  to obtain more descriptions and explanations. To clear any

values you’ve entered on any page, click CANCEL and re-enter information.