SouthWing BOFLX Manuel D’Utilisation

 
 
Normal pairing 
You will need to follow the steps below if you want to pair your headset with another 
mobile phone.  
1. Ensure the headset is off. 
2. Put the headset in pairing mode by pressing and holding the Multi-function button [2] 
for about 5 seconds until the Indicator Light [2] flashes red and blue alternatively and a 
series of high tones are heard. 
3. Complete the normal pairing process by following steps 1, 2 and 3 in the auto-pairing 
section. 
 
3. WEARING AND CARRYING THE HEADSET 
Selecting an ear bud 
The headset comes with different sized comfortable ear buds, try and select the one that 
best fits your ear. 
To replace an ear bud: 
1. With your hand, pull gently outwards from one side of the ear bud; make sure that 
you do not lose the ear bud once removed. 
2. Select a new ear bud and adjust it carefully so it fits perfectly over the speaker nozzle 
 
Wearing the Headset with the Ear hook 
The Ear hook can be used for firm hold and maximum comfort. To mount the Ear hook, 
carefully place the round head of the Ear hook between the headset body and the clip, 
and make sure that it is firmly adjusted. To wear it follow these steps:              
1. Rotate the Ear hook [8] slightly forwards. 
2. Gently place the Speaker [5] into your ear canal. 
3. Rotate the Ear hook [8] backwards and adjust it behind your ear. 
4. To use the headset in the other ear, simply mount the Ear hook [8] on the other side 
of the headset. 
 
Wearing the Headset without the Ear hook 
To wear the headset without using the Ear hook: 
1. Remove the Ear hook by pulling it out gently and store it in a safe place 
2. Gently place the Speaker [5] into your ear canal. 
3. Find the most comfortable position by rotating the headset forward and backward. 
 
Carrying the Headset 
When not in use, you can carry your headset in one of the following convenient ways.  
1. Clip it to your clothes using the designed clip in the bottom part of the headset.  
2. Attach it to your mobile phone using the provided cord; connect one end to the 
headset charging port and use the cord to hold it to your mobile. 
 
4. GENERAL USAGE 
Turning the Headset On and Off 
To turn the headset on, press and hold the Multi-function button [2] for about 3 seconds 
until a rising series of tones is heard and the Indicator Light [2] flashes blue 6 times.  
To turn the headset off, press and hold the Multi-function button [2] for about 3 seconds 
until a series of tones is heard and the Indicator Light flashes before turning off.