Mine Safety Appliances Company 10063188 Manuel D’Utilisation
INSTALLATION
INSTALLING THE SOFTWARE
1. Insert the MSA ICM TxR Accountability software into
the CD drive.
2. The program will begin to install automatically upon
insertion of the CD. If the program does not launch
automatically, Locate the CD drive (Commonly D:
Drive) and open the file titled “setup.exe”.
automatically, Locate the CD drive (Commonly D:
Drive) and open the file titled “setup.exe”.
3. Follow the instructions on the screen to complete the
software installation process.
Note: The software can only be installed by the PC
administrator or by a person that has full read/write
access to the PC. Users of the software must be at least
a “main user” registered with the PC. “Guest” users will
not be able to access the MSA ICM TxR Accountability
software.
administrator or by a person that has full read/write
access to the PC. Users of the software must be at least
a “main user” registered with the PC. “Guest” users will
not be able to access the MSA ICM TxR Accountability
software.
INSTALLING THE HARDWARE
Installation of this device requires professional instal-
lation. Base station antenna attachment should only
be performed after proper instruction. DO NOT oper-
ate the system without the antenna properly attached
to the base station.
lation. Base station antenna attachment should only
be performed after proper instruction. DO NOT oper-
ate the system without the antenna properly attached
to the base station.
Note:
A broken or defective antenna must be replaced by
a professional installer only.
1. Connect power cord to the left side of the base sta-
tion and plug it into a DC (12-24 V) vehicle power out-
let. (An AC power adapter (P/N 10047342) is also
available. This adapter is designed to connect to a
standard 120V outlet.).
let. (An AC power adapter (P/N 10047342) is also
available. This adapter is designed to connect to a
standard 120V outlet.).
2. Connect the antenna to the base station by threading
the TNC fitting on to the jack on the right side of the
base station.
base station.
Note: The base of the antenna has a magnetic platform.
It is recommended that it be placed in an area that is
above the base station and is free from obstruction, such
as the roof of a vehicle.
It is recommended that it be placed in an area that is
above the base station and is free from obstruction, such
as the roof of a vehicle.
Use only antennas provided by MSA for use with this
base station. Failure to do so will be in violation of the
FCC approval of this device. Antenna: P/N 10072527;
Magnetic Base: P/N 10072528
base station. Failure to do so will be in violation of the
FCC approval of this device. Antenna: P/N 10072527;
Magnetic Base: P/N 10072528
3. Connect the USB cable to the port on the left side of
the base station and to an empty USB port on the PC.
Note: Windows may prompt for driver installation when
the base station is first connected to the USB port on the
PC. If this occurs simply follow the steps on the screen.
The drivers are located on the MSA ICM TxR
Accountability software CD.
the base station is first connected to the USB port on the
PC. If this occurs simply follow the steps on the screen.
The drivers are located on the MSA ICM TxR
Accountability software CD.
Note: If the message below appears while installing the
drivers, click “Continue Anyway”. This only indicates that
the drivers used in the MSA Accountability Software are
not registered with Microsoft.
drivers, click “Continue Anyway”. This only indicates that
the drivers used in the MSA Accountability Software are
not registered with Microsoft.
Use only USB cables provided by MSA for use with
this base station. Failure to do so will be in violation
of the FCC approval of this device.
this base station. Failure to do so will be in violation
of the FCC approval of this device.
4. The base station has two (2) holes in the housing that
can be used to mount the base station to a wall or
table top.
table top.
The base station is not waterproof. Do not mount
base station to exterior of vehicle.
base station to exterior of vehicle.
5
TAL 605 (L) Rev. 0 - 10068929