Hamg Shing Corp KBA100N-LF Manuel D’Utilisation

1.  Plug the included AC power supply into the Power Jack on the Music Port.  

2.  Plug the other end of the AC power supply into an appropriate wall outlet. 

1.  Connect the “Audio Out” jacks of the Music Port to a normal stereo headset or “Audio In” jacks on your 

home stereo system. 

2.  Connect the “Audio In” jacks of the Music Port to “Audio Out” jacks of your computer or home stereo 

system. 

As a transmitter, the Music Port transmits the audio from the “Audio In” jack wirelessly to a Bluetooth stereo 

headset. 

1.  Pair with a neighbouring Bluetooth stereo headset 

- Place the stereo headset close to the Music Port and put the stereo headset into pairing mode.  

- Place the Music Port into “Transmitter” mode.  

Turn on the Music by pressing briefly the “PWR” button.  

Switch the Music Port to the “Transmitter” mode. 

Pressing briefly the “PWR” button once will change the mode. Keep pressing the “PWR” button until the mode is 

“Transmitter” mode. When the Music Port is in “Transmitter” mode, the Transmitter Indicator Light will turn on. 

- 

Put the Music Port into pairing state 

Press briefly the “PAIR” button. Now, the Music Port goes into pairing as a Transmitter. The Transmitter 

Indicator Light blinks to indicate that the Music Port is in pairing. 

If everything runs smoothly, the Music Port will pair and connect up to the neighbouring Bluetooth stereo headset. 

2.  Audio streaming 

The audio will start streaming wirelessly from the Music Port to the headset after connection is successful.  

The Transmitter Indicator Light blinks quickly to indicate that streaming is in progress.