Trilliant Networks Inc. SC1050 Manuel D’Utilisation

SKYPILOT NETWORKS CONFIDENTIAL AND PROPRIETARY 

 

Page  

8

 

 
The SkyPilot CPE is designed for a wide range of installations. The Indoor CPE can be 
user installed in a home or office. The Outdoor CPE can easily be installed on the roof or 
exterior wall of an office, apartment build or single family home. The Outdoor CPE can 
also be very easily installed on a light or utility pole. 
 

 
Before mounting the Indoor CPE the user must first find an appropriate location within 
the home or office building. In the case where there is limited Gateway/Seed coverage, 
the operator may aid this process by providing general pointing instructions. i.e. Point 
CPE in a West to Northerly direction. The user should avoid installations heavily effected 
by localized foliage or other obstructions, and should select upper floors if possible. 
 
The user should power the CPE (See Section 3.1.2 for details) and place the unit in 
window. Once the CPE has successfully initialized, the beacon signal strength shall be 
indicated by the WAN Activity LED (LED 4). The faster the cadence, the higher the 
receive power. Ideally, the user shall test the CPE in multiple locations selecting the one 
with the highest reported power level. The Indoor CPE LEDs can be seen below.