Raymarine Belgium Bvba T120-916 Manuel D’Utilisation
Wind Transmitter
Tacktick Limited
22 North Street, Emsworth,
22 North Street, Emsworth,
Hampshire, PO10 7DG, England
Tel. +44 (0)1243 379331
Fax. +44 (0) 1243 379199
Fax. +44 (0) 1243 379199
www.tacktick.com
Tools Required
Parts List
1. Drill
Bit
2. Power
Drill
3.
Cross Head Screwdriver
1.
Masthead Mounting Plate
2. Wind
Transducer
3.
Mounting Screws (3 off)
Precautions
Carry out the “Auto Network” procedure and make sure the unit is
operating correctly BEFORE attaching the Wind Transmitter to the
operating correctly BEFORE attaching the Wind Transmitter to the
masthead. Ensure that there is enough surface area at the top of the mast
to attach the Transmitter Base. Check to make sure that the vane and
anemometer cups are moving freely.
Positioning Advise
uu043 rev. 7
Wind Transmitter
Tacktick Limited
22 North Street, Emsworth,
22 North Street, Emsworth,
Hampshire, PO10 7DG, England
Tel. +44 (0)1243 379331
Fax. +44 (0) 1243 379199
Fax. +44 (0) 1243 379199
www.tacktick.com
Tools Required
Parts List
1. Drill
Bit
2. Power
Drill
3.
Cross Head Screwdriver
1.
Masthead Mounting Plate
2. Wind
Transducer
3.
Mounting Screws (3 off)
Precautions
Carry out the “Auto Network” procedure and make sure the unit is
operating correctly BEFORE attaching the Wind Transmitter to the
operating correctly BEFORE attaching the Wind Transmitter to the
masthead. Ensure that there is enough surface area at the top of the mast
to attach the Transmitter Base. Check to make sure that the vane and
anemometer cups are moving freely.
Positioning Advise
uu043 rev. 7