Think Outside XTBT01 Manuel D’Utilisation
Reconnecting the Axim Wireless Keyboard
The above steps establish the Bluetooth wireless connection and bonding between the
Pocket PC device and the keyboard for the first time. Keyboard character input should
be enabled as long as the connection is maintained.
Despite a high degree of reliability, the Bluetooth connection could break for many
reasons:
¾
When the keyboard cover is closed, the keyboard circuit will be powered off, and the
Bluetooth connection will be lost.
¾
As a power saving feature, the keyboard will be automatically powered down after
an idle period (when there is no activity for approximately 3 minutes).
¾
When the Pocket PC device is turned off, the established Bluetooth connection will
be lost.
¾
When the Pocket PC device and the keyboard are moved away from each other
beyond the wireless range (~10m), the previously established connection is lost.
When any of these conditions occurs, the connection will be
lost and the software will switch to waiting mode. To restore
the connection, make sure the keyboard and Pocket PC
device are powered on and in range, then tap any key on
the keyboard. The connection should be reestablished
within 2-3 seconds but this may be delayed if the Bluetooth
system on the Pocket PC device is busy. For example, after
the Pocket PC device is powered on, it may take 10 or
more seconds for the Bluetooth system to re-initialize.
NOTE:
lost and the software will switch to waiting mode. To restore
the connection, make sure the keyboard and Pocket PC
device are powered on and in range, then tap any key on
the keyboard. The connection should be reestablished
within 2-3 seconds but this may be delayed if the Bluetooth
system on the Pocket PC device is busy. For example, after
the Pocket PC device is powered on, it may take 10 or
more seconds for the Bluetooth system to re-initialize.
NOTE:
Do not press Ctrl,
Left Fn
and
Right Fn
together.
This will break the bond between the keyboard and the
Pocket PC device. If this happens, you will have to
establish a new connection as described above.
Even when disconnected, the Pocket PC device and the keyboard remain bonded. The
keyboard will only reconnect to the bonded Pocket PC device and the Pocket PC device
will only listen to the bonded keyboard. To break the bond press Ctrl,
Pocket PC device. If this happens, you will have to
establish a new connection as described above.
Even when disconnected, the Pocket PC device and the keyboard remain bonded. The
keyboard will only reconnect to the bonded Pocket PC device and the Pocket PC device
will only listen to the bonded keyboard. To break the bond press Ctrl,
Left Fn
and
Right
Fn
for approximately 1 second or until the green LED flashes quickly. Normally the bond
will not need to be broken unless the keyboard will be used with another Pocket PC
device or another keyboard will be used with the Pocket PC device. Therefore, please
avoid pressing Ctrl,
device or another keyboard will be used with the Pocket PC device. Therefore, please
avoid pressing Ctrl,
Left Fn
and
Right Fn
during normal operation. If this has
happened, you will have to establish a new connection as described in the
section above.
Axim Wireless Keyboard Owner’s Manual Page 10