Bellwave Co. Ltd. BPP-UP100 Manuel D’Utilisation
Getting Started
Installing a SIM Card
When you subscribe to a mobile network, you
are provided with a plug-in SIM card loaded with
your subscription details (PIN, optional services
available and so on).
1. If necessary, switch the phone off to press
and hold down the <End: Power> key.
2. Remove the battery. To do so:
① After p
ushing the lock button, pull the battery
cover toward outside.
②
Lift the battery away, as shown.
3. Insert the SIM card ensuring that the cut
corner is at the top right and the gold contacts
of the card face into the phone.
4. Reinstall the battery. To do so:
①
Place the battery so that the tabs on it align
to the connectors at the inside of the phone.
② Close
the battery cover until it clicks into
place. Make sure that the battery is properly
installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery.
A travel adapter and a desktop charger are
provided with your phone. Use only approved
batteries and chargers. Ask your local dealer for
further details.
… … … … … … … … … … … … … … … … … … … … … … … … … … … … … …
Note: You must fully charge the battery before using
your phone for the first time. The phone can be
used while the battery is charging.
… … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … …
Charging the Battery Alone
To charge the battery alone, use the desktop
charger unit.
1. Open the cover of the desktop charger.
2. Insert the battery alone into the slot making
sure that the terminals on the battery contact
to the terminals on the slot.
3. Push down the battery until you hear a click.
4. Insert the lead of the travel adapter into the
connector socket of the desktop charger.
5. Connect the adapter to a standard AC wall
outlet.
6. The color indication of the LED on the charger
is as follows:
• Red : charging
• Blue : fully charged
7. When charging is finished (the LED turns in
green), unplug the power cord of the adapter
from the AC outlet and remove the battery
from the charger.
Charging the Battery with the
Phone
Phone
You can use the phone while charging by
charging the battery attached to the phone.
1. With the battery in position on the phone,
connect the lead from the travel adapter to
the connector at the bottom of the phone.
2. Connect the charger to a standard AC wall
outlet.
3. When charging is finished (the LED turns in
green), disconnect the adapter from the power
outlet and from the phone.