Quanta Microsystems Inc. WU202 Manuel D’Utilisation
Quanta Computer
Inc.
Inc.
Information File from you local hard disk.
10. You can click “Create New” button to create
new one used for device authentication.
11. Please select NWG spec as R1.0 or Draft or
No Decoration.
12. Please click “Save Setting” button to save all
authentication settings.
13. If you want to reset to default setting, please
click “Reset” button.
14. If the “Outer Identity” is empty, please exit
this WCM and take out your WiMAX device.
15. You must plug in your WiMAX device firstly
before you configure device authentication,
otherwise WCM can NOT detect and get your
device MAC address and can NOT put its
MAC address as outer identity for device
authentication.
16. Once you have plugged in your WiMAX
device, please open WCM and wait for 5
seconds for WCM to initialize your device
and get MAC address. Then you can start to
configure device authentication.
17. Now, you can connect to base station
successfully.
6.4. Functional Button
The following Configuration File parameters affect the WCM behavior.
Page 30