Texa S.p.A. NW10 Manuel D’Utilisation
The red LED (1) on the control panel will light up if the connection is correct.
Check that the wire polarity is correct if this does not occur.
IMPORTANT NOTE: NAVIGATOR Wireless does not fit an internal battery.
For this reason make sure that the instrument is being powered correctly.
It is therefore advisable to connect directly to the battery also in the case of
cars with the battery located in the rear end.
Make sure that the cigar lighter is always powered (i.e. not powered via the
ignition switch) if this solution is used.
1.4 How to connect to the vehicle
1
2
Various terminals (2) are used to connect to the vehicle. Choose the type of
terminal for the selected vehicle according to the indications provided by the
program.
MT_NAVIGATOR Wireless_eng_00 Texa S.p.A. 48/122