ads-tec GmbH RAX1X2X Manuel D’Utilisation
User Manual
User Manual
User Manual
User Manual Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
Access Point /Client V 3.0.3
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
75
75
75
75
8.1
B
ASIC
S
ETTINGS
M
AIN
M
ENU
8.1.1
8.1.1
8.1.1
8.1.1
IP
IP
IP
IP Configuration
Configuration
Configuration
Configuration
Access Point IP configuration
Note:
Clicking the question mark
to the right of the drop-down menus will open up general
information about and brief descriptions of the available options.
Static:
If this option is selected you may enter a static IP address. Static IP address assignment
requires entering an IP address and its corresponding subnet mask.
requires entering an IP address and its corresponding subnet mask.
Default values are:
IP address:
192.168.0.254
Subnet mask: 255.255.255.0
DHCP:
The DHCP function requests an IP address from a DHCP server and automatically assigns
that address.
that address.
DHCP fallback
:
This option is a combination of static and automatic IP address assignment. In case an error
occurs during automatic address assignment (via DHCP server), the system automatically
uses the specified static IP address.
occurs during automatic address assignment (via DHCP server), the system automatically
uses the specified static IP address.
Activate Spanning Tree Protocol:
The Spanning Tree Protocol (STP) is used to avoid redundant network loops, especially in
switched environments.
switched environments.
If this option is enabled, it is possible to establish redundant network connections.