ads-tec GmbH RAX1X2X Manuel D’Utilisation
User Manual
User Manual
User Manual
User Manual Access Point /Client
Access Point /Client
Access Point /Client
Access Point /Client V 3.0.3
V 3.0.3
V 3.0.3
V 3.0.3
8
8
8
8
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
1.5
C
OPYRIGHT
This User’s Guide inclusive of all the images it contains is entirely proprietary and subject to
copyright. Any irregular use of this Guide by third parties infringing copyright terms is thus
strictly forbidden. Reproduction, translation, as well as electronic and photographic image
storage and/or amendment processes, are subject to prior written authorisation directly by
M/s. ads-tec GmbH.
copyright. Any irregular use of this Guide by third parties infringing copyright terms is thus
strictly forbidden. Reproduction, translation, as well as electronic and photographic image
storage and/or amendment processes, are subject to prior written authorisation directly by
M/s. ads-tec GmbH.
Any violation and infringement thereto will be held liable for compensation of all damages.
1.6
S
TANDARDS
This unit is compliant with the provisions and safety objectives of the following EU
Directives:
Directives:
•
This unit is compliant with the CE mark testing specification limits as defined in the
European test standards EN 55022 and EN 50082-2
European test standards EN 55022 and EN 50082-2
•
This unit is compliant to the DIN EN 60950 (VDE0805, IEC950) testing specification
limits on “Safety of Information Technology Equipment”
limits on “Safety of Information Technology Equipment”
•
This unit is compliant to the DIN EN 60068-2-6 (sinusoidal vibration) testing
specification limits
specification limits
•
This unit is compliant to the DIN EN 60068-2-27 (shock and bump) testing
specification limits
specification limits
Note:
A corresponding declaration of conformity is available for competent authorities, care of
the Manufacturer. Said declaration can be viewed at all times upon request.
the Manufacturer. Said declaration can be viewed at all times upon request.
For full compliance to the legal requirements in force on electromagnetic compatibility, all
components and cables used for unit connection must also be compliant with said
regulations. It is therefore necessary to employ BUS and LAN cables featuring screened
plug connectors, to be strictly installed as per the instructions contained in the User
Manual.
components and cables used for unit connection must also be compliant with said
regulations. It is therefore necessary to employ BUS and LAN cables featuring screened
plug connectors, to be strictly installed as per the instructions contained in the User
Manual.