Dadam Micro Inc. ABC-200CB Manuel D’Utilisation
User’s Manual: ABC-2 Series (SL)
Revision 1.2 (August 23, 2005
)
Elisync Technologies LLC.
-14-
5. System Setup Method
5.1 Wireless PAIRING Setup
1) In control box, press and release the PAIRING
button to go into pairing mode. The GREEN
INDICATOR light will begin to flash in 0.2 second
interval.
The pairing mode continues 10 seconds. After 10
seconds, control box exits from pairing mode
automatically.
INDICATOR light will begin to flash in 0.2 second
interval.
The pairing mode continues 10 seconds. After 10
seconds, control box exits from pairing mode
automatically.
2) In hand control, press and hold the SET button for
3 seconds to go into pairing mode. The GREEN
INDICATOR light will begin to flash in 1 second
interval. In pairing mode, hand control
continuously transmits its unique ID.
The pairing mode continues 10 seconds. After 10
seconds, hand control exits from pairing mode
automatically. Pressing the SET button also stops
the GREEN INDICATOR flashing.
INDICATOR light will begin to flash in 1 second
interval. In pairing mode, hand control
continuously transmits its unique ID.
The pairing mode continues 10 seconds. After 10
seconds, hand control exits from pairing mode
automatically. Pressing the SET button also stops
the GREEN INDICATOR flashing.
3) Control box tries to find available ID transmitted
from hand control. The pairing process will go on
until control box finds any available ID. If it finds
the ID, pairing will be completed and the GREEN
INDICATOR light turns on again.
until control box finds any available ID. If it finds
the ID, pairing will be completed and the GREEN
INDICATOR light turns on again.
Electronic ID
Each hand control has unique, factory-lasered 16-bit
registration ID number that provides an absolutely
unique identity, which guaranteed no two hand control
alike.
registration ID number that provides an absolutely
unique identity, which guaranteed no two hand control
alike.
RECOVERY FROM PAIRING FAIL
Due to electrical writing timing problem, the
PAIRING information saved on EEPROM of
CPU may be erased in some cases.
If it happens, please retry of PAIRING process
again.
PAIRING information saved on EEPROM of
CPU may be erased in some cases.
If it happens, please retry of PAIRING process
again.