Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation
1. Read First
1-6 Required tools
13
1-6
Required tools
You will need the following tools to install this product. If you do not already have these tools, please purchase
them separately.
them separately.
RJ45 crimping tool
Recommended product
(1) Tyco Electronics AMP 2-231652-1
(2) IDEAL 30-521
(1) Tyco Electronics AMP 2-231652-1
(2) IDEAL 30-521
Phillips head screwdriver No. 2
(or M5)
(or M5)
Use during installation.
Torque wrench
(for the M6 metal mounting
bracket bolts)
(for the M6 metal mounting
bracket bolts)
Use during installation.
We recommend that you use a tool with torque control.
We recommend that you use a tool with torque control.
LAN cable qualification tester
Use to check the quality of LAN cables swaged to wires and
the RJ-45 connectors.
Poor swages cannot be detected through a conduction
check. Use a LAN cable qualification tester that is capable
of verifying the quality of a 100BASE-TX cable.
Recommended product
(1) Fluke CIQ-100
the RJ-45 connectors.
Poor swages cannot be detected through a conduction
check. Use a LAN cable qualification tester that is capable
of verifying the quality of a 100BASE-TX cable.
Recommended product
(1) Fluke CIQ-100
Vinyl tape, self-adhesive tape
If installing outdoors, wrap the tape around the drip-proof
cap.
cap.
Binoculars
Use if the opposed device is a long way away and the
installation location is not visible.
installation location is not visible.
Monitor cable
(Optional items available from
Hitachi Kokusai Electric)
Product name: SL-monitor cable
Model: HP5-010601
(Optional items available from
Hitachi Kokusai Electric)
Product name: SL-monitor cable
Model: HP5-010601
Use to adjust the antenna direction when monitoring the
receive level. Use this cable to connect the received power
monitor terminal and the digital multimeter.
receive level. Use this cable to connect the received power
monitor terminal and the digital multimeter.
Torque wrench
(Size 3mm for M4 hexagon socket
bolts)
(Size 3mm for M4 hexagon socket
bolts)
Use to open and close the lid of the received power monitor
terminal.
We recommend that you use a tool with torque control.
terminal.
We recommend that you use a tool with torque control.
Digital multimeter
Use to adjust the antenna direction when monitoring the
receive level. DC: 0 to 3.3V Accuracy: Use a meter that
can measure at 1.5%.
receive level. DC: 0 to 3.3V Accuracy: Use a meter that
can measure at 1.5%.