Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation

3. Installation/Connection/Setup

 

 

3-3 Setting up from a PC

 

 

 

21

5 

Enter the following settings.   
 

 

 
 
For details, refer to "4-2 Configuring 
basic wireless and LAN settings." 
 

Enter the name of the main unit. 
 

Enter Master (primary station) or Slave 
(tributary station).   
 

Enter the same strings as these on the 
opposed device. 
 

Opposed 

wireless 
commu- 

nication 

 
 
 
 
 
 

 

Operation 

Mode 

Master Slave 

Link ID 

(Example) 

ABCDEF ABCDEF 

 
[For preventing interference] 
Set a different Link ID for each Master 
and Slave pair.   
To ensure security, change the default ID. 
 
 
If you set the same Link ID for multiple 
pairs, normal communication may not be 
possible (unable to communicate, pair 
combinations not acknowledged correctly, 
or unstable communication).   
 
 

 

 IP address    Subnet mask  
 Default gateway  
 VLAN tag    Priority    VID  

Make suitable entries for your LAN 
environment into "IP Address". 
If you make invalid entries, you cannot 
perform maintenance communication with 
this product. 
 

6 

Enter every setting, and then click the 
"Apply" button.   
 

 

* The entered values are samples. 
 
Click the "Apply" button in each setup 
page. If you open another page without 
clicking the "Apply" button, the entered 
information is not saved and will be lost. 
 

7 

Click "OK" to set up this product.   
 

 

8 

On the menu, click the "Save" button. 
 
The current settings information is saved 
to the internal flash memory.   
The settings remain in the flash memory 
even after the power is turned off.