Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation
4. Performing Maintenance From a Web Browser
4-2 Configuring basic wireless and LAN settings
40
4-2
Configuring basic wireless and LAN settings
1
To display the "Wireless and LAN
Configuration" window, click "Wireless
and LAN Configuration" on the menu.
Configuration" window, click "Wireless
and LAN Configuration" on the menu.
Device Name
Enter any name. The information entered
here is displayed under the product
name in the menu on the left side of the
web browser window.
You can enter up to 20 single-byte
alphanumeric characters or symbols.
(Default value: none)
here is displayed under the product
name in the menu on the left side of the
web browser window.
You can enter up to 20 single-byte
alphanumeric characters or symbols.
(Default value: none)
Operation Mode
Enter "Master" (primary station) or "Slave"
(tributary station).
In wireless communication with an
opposed device, you have to make one
device the Master and the other device
the Slave. You cannot perform wireless
communication if both this device and the
opposed device are Masters (or Slaves).
To apply the settings to operations, you
need to issue instructions to reconnect to
wireless.
(Default value: Slave)
(tributary station).
In wireless communication with an
opposed device, you have to make one
device the Master and the other device
the Slave. You cannot perform wireless
communication if both this device and the
opposed device are Masters (or Slaves).
To apply the settings to operations, you
need to issue instructions to reconnect to
wireless.
(Default value: Slave)
Link ID
Enter the same strings as these on the
opposed device. You cannot establish a
wireless connection if you enter different
strings.
You can enter up to six single-byte
alphanumeric characters or symbols.
(Default value: Not set)
opposed device. You cannot establish a
wireless connection if you enter different
strings.
You can enter up to six single-byte
alphanumeric characters or symbols.
(Default value: Not set)
Opposed
wireless
commu-
commu-
nication
Operation
Mode
Master Slave
Link ID
(Example)
ABCDEF ABCDEF
[For preventing interference]
Set a different Link ID for each master
and slave pair.
To ensure security, change the default ID.
If you set the same Link ID for multiple
pairs, normal communication may not be
possible (unable to communicate, pair
combinations not acknowledged correctly,
or unstable communication).
IP Address
Enter the IP address for this device. The
input range is from Class A to Class C.
You have to save the setting and restart
the device for the IP address settings to
take effect.
(Default value: 192.168.0.202)
input range is from Class A to Class C.
You have to save the setting and restart
the device for the IP address settings to
take effect.
(Default value: 192.168.0.202)
Subnet Mask
Enter the subnet mask for this device.
The input range is from 255.0.0.0 to
255.255.255.252.
You have to save the setting and restart
the device for the subnet mask settings
to take effect.
(Default value: 255.255.255.0)
The input range is from 255.0.0.0 to
255.255.255.252.
You have to save the setting and restart
the device for the subnet mask settings
to take effect.
(Default value: 255.255.255.0)
Default Gateway
Enter the IP address of the default
gateway for this device.
You have to save the setting and restart
the device for the default gateway
settings to take effect.
(Default value: Not set)
gateway for this device.
You have to save the setting and restart
the device for the default gateway
settings to take effect.
(Default value: Not set)