Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation
4. Performing Maintenance From a Web Browser
4-7 Checking the wireless status
47
4-7
Checking the wireless status
1
To display the "Wireless Status" window,
click "Wireless Status" on the menu.
click "Wireless Status" on the menu.
Operation Mode
Shows the operation mode for this product.
Link Status
Shows the status of the connection with
the opposed device.
the opposed device.
Air Data Rate
Displays the air data rate. This product
makes the adaptive modulation.
The speed switches between
150Mbps/100Mbps/50Mbps-High/50
Mbps-Low, depending on the conditions.
makes the adaptive modulation.
The speed switches between
150Mbps/100Mbps/50Mbps-High/50
Mbps-Low, depending on the conditions.
Transmission Ratio
Shows a transmission ratio of master to
slave.
5:5 or 8:2 is displayed, depending on the
conditions.
slave.
5:5 or 8:2 is displayed, depending on the
conditions.
Channel in-use
Shows the wireless channel number that
this product uses.
this product uses.
Distance
Shows the distance of the wireless link.
The distance is displayed in units of 12m
and may include errors of approximately
0 to +36m.
If the interval measurement is set to
maximum, "---" is displayed.
The distance is displayed in units of 12m
and may include errors of approximately
0 to +36m.
If the interval measurement is set to
maximum, "---" is displayed.
Throughput
Shows the throughput for this device or
the opposed device.
This product switches the throughput
according to the transmission ratio and
the air data rate of the master and slave.
the opposed device.
This product switches the throughput
according to the transmission ratio and
the air data rate of the master and slave.
Transmission ratio 5:5
Air Data Rate
Throughput
Master
Slave
150Mbps 59Mbps
100Mbps 39Mbps
100Mbps 39Mbps
50Mbps-High
19Mbps
50Mbps-Low 13Mbps
Transmission ratio 8:2
Air Data Rate
Throughput
Master
Slave
150Mbps 95Mbps
23Mbps
100Mbps 62Mbps
15Mbps
50Mbps-High
31Mbps 7Mbps
50Mbps-Low 22Mbps 5Mbps
Output Power
Shows the output power for this product.
When the output power is less than
-25dBm, the value will be inaccurate due
to measurement errors.
When the output power is less than
-25dBm, the value will be inaccurate due
to measurement errors.
RSSI
Shows the rssi for this device or the
opposed device.
opposed device.
SNR
Shows the quality of the receive signal for
this device or the opposed device.
this device or the opposed device.
SNR Margin
Shows the receive S/N ratio margin at the
current air data rate.
When this value is small, the link speed
might drop one level, depending on the
wireless status.
current air data rate.
When this value is small, the link speed
might drop one level, depending on the
wireless status.