Hitachi Kokusai Electric Inc. SL24G-US-02 Manuel D’Utilisation
4. Performing Maintenance From a Web Browser
4-11 Changing login information
51
4-11
Changing login information
1
To display the "Set Password" window,
click "Set Password" on the menu.
click "Set Password" on the menu.
Login Name
Enter the login name for the web
maintenance.
You can enter up to 16 single-byte
alphanumeric characters or symbols.
(Default value: administrator)
maintenance.
You can enter up to 16 single-byte
alphanumeric characters or symbols.
(Default value: administrator)
New Password
New Password (Again)
New Password (Again)
Enter a new password.
You can enter up to 16 single-byte
alphanumeric characters or symbols.
(Default value: Not set)
You can enter up to 16 single-byte
alphanumeric characters or symbols.
(Default value: Not set)
2
Enter the login name and password, and
then click the "Apply" button.
then click the "Apply" button.
The new login name and password are
now effective.
When you change the login name and
password, always keep a separate
record of the information so that you
do not forget it. If you forget your login
name and password, you will not be
able to perform device maintenance.
Charges apply to reset login information
at the factory.
4-12
Setting the time
1
To open the "Set Date & Time" window,
click "Set Date & Time" on the menu.
click "Set Date & Time" on the menu.
Date & Time
Shows the current time for the internal
clock.
When the power is turned off and then
on, or an error in the clock time became
large, reset the correct date and time in
this window.
clock.
When the power is turned off and then
on, or an error in the clock time became
large, reset the correct date and time in
this window.
New Date & Time
Enter the new date and time.
After you enter the date and time, click
"Apply the direct input".
The date and time of the internal clock
changes to the entered date and time.
To set to the date and time of the
configuration PC, click "Apply PC's Date
& Time".
The date and time of the internal clock
becomes the same as the configuration
PC date and time.
After you enter the date and time, click
"Apply the direct input".
The date and time of the internal clock
changes to the entered date and time.
To set to the date and time of the
configuration PC, click "Apply PC's Date
& Time".
The date and time of the internal clock
becomes the same as the configuration
PC date and time.