Impinj Inc. IPJR640 Manuel D’Utilisation
Speedway Revolution Installation and Operations Guide Octane 4.4
Chapter 1: Introduction
Chapter 1: Introduction
6
Copyright © 2010, Impinj, Inc.
Supported Communication Protocol
For client control of the reader, Speedway Revolution supports the EPCglobal Low
Level Reader Protocol (LLRP) v1.0.1. LLRP is an EPCglobal standard interface
allowing communication with the reader, which in turn reads EPCglobal Gen 2
RFID tags.
Level Reader Protocol (LLRP) v1.0.1. LLRP is an EPCglobal standard interface
allowing communication with the reader, which in turn reads EPCglobal Gen 2
RFID tags.
Antenna Requirements
Depending on the reader model you are installing, Speedway Revolution is
equipped with two (R220) or four (R420) independent, bidirectional, and full
duplex TX/RX monostatic antenna ports .
Antenna requirements vary by regulatory region. For details about the
requirements in a specific region, see the relevant antenna section in “Appendix
A:
equipped with two (R220) or four (R420) independent, bidirectional, and full
duplex TX/RX monostatic antenna ports .
Antenna requirements vary by regulatory region. For details about the
requirements in a specific region, see the relevant antenna section in “Appendix
A:
Information Specific to Regions of Operation
” on page 33.