Toshiba IK-1000 Manuel D’Utilisation

- 10 -

Lens

 

Camera body

 

Monitor

 

DC 12 V power supply

 

DC IN 12V terminal

VIDEO terminal

Coaxial cable of 75Ω

 

 

• When installing the camera, unplug the power source of the camera and all connected

equipment.

• Please use a monitor which has BNC or S-Video input.
• A coaxial cable of 75

Ω or S-Video cable is needed to connect a video monitor etc.

• For DC power supply connecting to DC 12 V terminal, use a power supply with the

specifications described below.

Power supply voltage:

DC12V 

±10%

Current rating:

2.0 A or more

Ripple voltage:

50 mV (p-p) or less

Connector:

HR10A—7P—4S by HIROSE Electronics Co., Ltd.
Pins 1, 2:  +12V
Pins 3, 4:  GND

(1) Install the lens to the camera body. For available lenses, refer to the item “5 LENS

ADJUSTMENT.”

(2) Connect a coaxial cable from the VIDEO terminal to the video input terminal of the

video monitor etc.

(3) Connect equipment, turn on the power supply to the camera, and then turn on the

power to the equipment.

(4) Adjust the lens by referring to item 5, obtain the best camera performance.