Gasngo R&D Ltd. RDR008 Manuel D’Utilisation
30
Chapter 3 – Station Installation Manual
Reader7 Installation
This guide refers to installation of the Reader7 on the following nozzles types:
Healy 600, OPW 7H, OPW, 11AP/A/B, OPW 11AVI, OPW 11VW, ZVA25, ZVA SL2.
1. Connect the battery to the Reader
Before connecting the battery to the Reader, verify the position of the connector.
Confirm that both sides are facing upwards.
(See illustration below).
Figure 9: Molex connector
2.
Insert the Reader into the insulator.
Assembling the Reader with the battery
Set the wire around the back of the reader and fasten with 3 plastic strips.
Make sure not to turn it counterclockwise.
Figure 10: Reader with Plastic Strips
When installing the Reader on one of the nozzles, never use the outside plastic.
(See red arrow).