Carlo Gavazzi Logistics SpA RAD02 Manuel D’Utilisation
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network.
8
Warranty
Carlo Gavazzi guarantees radar device to be free of manufacturing defects for 2 Years from purchasing date. The guarantee
intervenes when the device presents a material defect. The faulty device can be returned back to our factory and will be repaired free
of charge. If the defect is due to an exceeding of the permissible technical data, wrong wiring, not permissible changes in equipment
by the user or a faulty operation no guarantee is carried out.
intervenes when the device presents a material defect. The faulty device can be returned back to our factory and will be repaired free
of charge. If the defect is due to an exceeding of the permissible technical data, wrong wiring, not permissible changes in equipment
by the user or a faulty operation no guarantee is carried out.
Warning: Changes or modifications made to this equipment not expressly approved by CARLO GAVAZZI LOGISTICS may void the
FCC authorization to operate this equipment.
FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warnings
Type
Detection mode
Detection mode
Ordering Key
RAD 01
Box Content
• Radar Motion Sensor
• Tie Clip for sensor fixing (RAD 01) or sensing field
setting (RAD 02)
• Connecting cable
• Screws and anchor fixing set
• Instruction manual
Type
IR remote controller
IR remote controller
Accessory
RAD 00 RC
Type selection
Detection Mode
Bidirectional*
Bidirectional*
01
Uni&Bi-directional*
02
* Bidirectional: to detect motion towards and away from the sensor
Uni & Bidirectional: to detect motion towards and/or away from the sensor.
Electrical data
Frequency emitted
(K-Band) 24.125GHz
Radiated power
< 16dBm EIRP
Rated supply voltage
12 – 24VAC ±10%
12 – 24VDC +30% / -10%
12 – 24VDC +30% / -10%
Main frequency
50 to 60HZ
Power consumption
< 0.5W (VA)
Output Relay SPDT
Rated Voltage
Rated Voltage
24VDC - 120VAC
Max switching current
1A (resistive load)
Max switching power
30W (DC) / 120VA (AC)
(resistive load)
(resistive load)
Hold time
0.5 – 9s (adjustable)
Environmental data
Temperature range
-4°F to +158°F
(-20°C to +70°C)
(-20°C to +70°C)
Humidity
from 0% to 90%RH
Immunity
R&TTE 1999/5/EC
EMC 89/336/EEC
EMC 89/336/EEC
Max. mounting height
13.12ft (4m)
Protection degree
IP54
General data
Sensing field orientation
double mechanical adjustment,
lateral and vertical
lateral and vertical
Detection angle
Vertical
0° to 90° in 15° increments
Lateral
+/- 30° in 7.5° increments
Sensing field shape
uni & bidirectional model
By means tie clip
bidirectional model
By Sensor module orientation
Detecting area
(mounting height 2.2m)
(mounting height 2.2m)
Wide sensing field
13.12ft (W) x 6.56ft (D)
(4m (W) x 2m (D))
(4m (W) x 2m (D))
Narrow sensing field
6.56ft (W) x 8.20ft (D)
(2m (W) x 2.5m (D))
(2m (W) x 2.5m (D))
Detection mode
Only bidirectional
to detect motions towards
and away from sensor
and away from sensor
Uni & bidirectional
to detect motions towards
or/and away from sensor
or/and away from sensor
Motion detecting speed
0.164 - 3.28fps (0.05 - 1m/s)
(measured in the sensor axis)
(measured in the sensor axis)
Mechanical data
Housing Material
Polycarbonate
Dimensions WxHxD
4.645 x 3.149 x 2.086inch.
(118 x 80 x 53mm)
(118 x 80 x 53mm)
Weight
5.29oz (150g)
Cable length
8.20ft (2.5m)
Colour
Glossy/Translucid Black
Approvals
Ro
RoHS Compliant
0
06
68
82
2