F.H.Papenmeier 1860-TRIO Manuel D’Utilisation

established with BRAILLEX Trio, using the seach assistant of the Bluetooth 
software installed on the PC. You need to have administrator privileges to be 

able to install such a connection. 
 

•  Switch on your BRAILLEX Trio and place it close to your computer (max. 

distance: 10 meters / 30 feet). 

•  Activate the search for Bluetooth devices in the neighborhood of your PC 

Bluetooth adapter. 

•  Select the device named "BRAILLEX Trio" (and eventually, any name addition 

you might have set, see above). 

•  When Initialising the pairwise connection, enter BRAILLEX Trio's pin number 

(see above). 

•  The serial connection is established and a serial port number is assigned for 

incoming and outgoing connections. You need to remember the port number 
for outgoing connections for the installation of the BRXCom communications 

program (see next chapter). 

Program 
Besides the USB driver (or the serial Bluetooth connection), BRAILLEX Trio 
requires some more software to be able to communicate with the computer. The 

programs include special drivers for the screen reader programs, a program for 
the data transfer back and forth, and a viewer program able to visualize the 

Braille display contents. 

IMPORTANT: System Requirements 
Once again: The Trio driver suite is based on the so-called service concept, and 
therefore requires a Windows operating system Windows 2000, Windows XP or 

Windows Vista. A solution for Win98SE with reduced functionality will be 
available as well, but the following will refer to Windows 2000, Windows XP or 
Windows Vista. 

Installer 
From the Trio CD, run Trio_Setup_EN.EXE. This will start an InstallShield wizard 

that will help you doing the installation. 
 

 

 
After the start screen, press Alt-N for "Next". 

 

10