F.H.Papenmeier 1860-TRIO Manuel D’Utilisation

 

dot 8, or simply dot 8) or EAB two steps down. You may also cancel the 
operation with Escape (space + dot 7) or EAB two steps up. 

•  Bluetooth Name 

Here you find the name used to identify BRAILLEX Trio as a Bluetooth device. 
By default this is "braillex trio". In environments where moe than one 

BRAILLEX Trios may appear, we suggest that you specify the name, adding 
the serial no. of the device to its name, for example. Confirm and exit this 

menu item with Enter (Space + dot 8, or simply dot 8) or EAB two steps 
down. You may also cancel the operation with Escape (space + dot 7) or EAB 

two steps up. 

•  Bluetooth Pin 

When two Bluetooth devices are connected, a pin code is used as a security 
feature. By default, BRAILLEX Trio's pin code is "0000". You can overwrite it 
with a new one and confirm with Enter (Space + dot 8, or simply dot 8) or 

EAB two steps down. Please keep in mind that those pin codes may only 
contain numbers. 

Select Braille Table 
When selecting this item you will enter a list of national Braille codes both for the 

Braille display and for the Braille keyboard. 
 

Chose the one that fits your preference using the arrow keys or the EAB. The 
star in front of the item indicates the current selection. Confirm and exit this 
menu item with Enter (Space + dot 8, or simply dot 8) or EAB two steps down. 

You may also cancel the operation with Escape (space + dot 7) or EAB two steps 
up. 

 
Please note that this selection will only concern BRAILLEX Trio's internal 

functions, not the PC access functions. 

Power in USB Operation 
Here you can define BRAILLEX Trio's power source when in USB operation. The 
choices are "use USB power" or "use internal battery". 
 

When selecting "use USB power", you decide to drain power from the USB host 
(typically a PC) BRAILLEX Trio is connected to. If this PC is a notebook PC, the 

second choice "use internal battery" may make sense, though, as BRAILLEX 
Trio's batteries last way longer than the notebook batteries typically do. 

 
Make your choice using the arrow keys or the EAB. The star in front of the item 

indicates the current selection. Confirm and exit this menu item with Enter 
(Space + dot 8, or simply dot 8) or EAB two steps down. You may also cancel 
the operation with Escape (space + dot 7) or EAB two steps up. 

 
Please note that in case the PC does NOT supply enough power, BRAILLEX Trio 

will use the internal batteries, and in case the internal batteries are empty, it will 
try to get the necessary power from the USB port. 

Sleep times 
This menu contains two items that both open a sub-menu: 

•  Sleep Time Display 

defines the inactivity time before the Braille display is switched off in order to 
save energy. Default is 5 minutes. Enter the desired sleep time and confirm 

with Enter (Space + dot 8, or simply dot 8). 
If you do not wish the display to switch off at all, enter "0".  

Once the display has gone to sleep, you activate it again by pushing the Easy 
Access Bar in any key direction.