NEC Nederland B.V. AP400-001 Manuel D’Utilisation
AP400
– All Types Installation Manual
Page 17 of 34
© NEC Nederland B.V. 2011
1.12
UNPACKING
PROCEDURE:
“Unpacking”.
Actions
1.
Open the card board box and take the AP400 out.
2.
Check the AP400 for any damage.
3.
Continue with one of the following Chapters:
When you mount the AP400 vertically, the antenna position will normally be OK,
and when you do not need to install the G.729 Daughter Board, continue with
and when you do not need to install the G.729 Daughter Board, continue with
When you mount the AP400 horizontally, you must change the antenna position.
Consult
Consult
When you require G.729 codec support, you will have to install the G.729
Daughter Board. Consult
Daughter Board. Consult
Chapter 3. MOUNTING THE G.729