Ophir Optronics Ltd QSR Manuel D’Utilisation
Appendix C – Getting the most from the Quasar
Switching the Quasar On and Off
Switching the Quasar On and Off
Figure C-2 Quasar device
The Quasar is switched on by momentarily pressing the red on/off button. The
blue LED flashes once for approximately 2 seconds.
blue LED flashes once for approximately 2 seconds.
The Quasar is switched off by pressing and holding the red on/off button for
approximately 4 seconds. The blue LED lights while the button is pressed, and is
extinguished when the Quasar powers off.
approximately 4 seconds. The blue LED lights while the button is pressed, and is
extinguished when the Quasar powers off.
Understanding the Quasar LED Indicator
The Quasar contains a single LED which indicates to the user the status of the
device. Refer to Table C-1 below.
device. Refer to Table C-1 below.
StarLab User Guide
105