Ophir Optronics Ltd QSR Manuel D’Utilisation
Chapter 3 – Getting Started
Configuring the Display for Energy Readings
Configuring Graph Limits and Time Period
To configure graph limits and time period:
1. In the Graph Configuration Area, use the Min Power and Max Power
scroll bars to configure minimum and maximum power in the Graph
Limits area.
Limits area.
Figure 3-3 Configuring Graph Limits and Time Period
– Graph Configuration Area
2. From the Min Power and Max Power drop down list, select the power
scale (nanowatts, microwatts, etc.). The graph shown in the Display Area
adjusts according to your selection.
adjusts according to your selection.
3. In the Time Period field, use the arrows to set the time period of the
Display Area in hours, minutes, and seconds. The graph shown in the
Display Area adjusts according to your selection.
Display Area adjusts according to your selection.
Configuring the Display for Energy Readings
This section explains the display options for thermopile and pyroelectric heads in
energy mode, and how to select them.
energy mode, and how to select them.
Note: To take measurements in energy mode when working with thermopile
and pyroelectric heads, select Energy from the Mode drop down list in
the Measurement Parameters Area.
the Measurement Parameters Area.
Selecting the Display Type
You can display measurement readings in histogram or bar graph format when
working in energy mode.
working in energy mode.
To select the display type in energy mode:
1. From the Display drop down list in the Graph Configuration Area, select
the desired graphic display option.
StarLab User Guide
23