Ophir Optronics Ltd QSR Manuel D’Utilisation
Chapter 7 – External Triggers and Missing Pulses
Configuring the External Trigger Settings
Configuring the External Trigger Settings
To configure the External Trigger Mode setting:
1. Click the External Trigger icon
.
Or
Select Functions from the main menu and from the sub-menu select Trigger
Configuration.
Configuration.
Or
Right click anywhere on the screen, and select Trigger Configuration from
the pop-up menu. The Trigger Configuration window appears.
the pop-up menu. The Trigger Configuration window appears.
Figure 7-1 Trigger Configuration Window
2. Select the desired setting from the Mode drop-down.
3. Click Save. The External Trigger settings are configured.
Configuring the External Trigger Window Time
You can configure the window time for the External Trigger when using the
Rising Edge or Falling Edge Trigger Configuration modes only.
Choosing the Window Time setting:
Rising Edge or Falling Edge Trigger Configuration modes only.
Choosing the Window Time setting:
Adjust the window time to be larger than the expected delay time
between the laser pulse and the trigger signal (the trigger can be before
or after the laser).
between the laser pulse and the trigger signal (the trigger can be before
or after the laser).
•
• The window time setting should be less than the laser period ("1/F",
where 'F' refers to the laser frequency).
Refer to Table 7-1 and Figure 7-2 for more information on the Window Time.
To configure the Window Time setting:
1. In the Window Time text box, enter the desired Trigger Window time,
between 1us (0.001ms) and 65535us (65.535ms).
2. Click Save. The Window Time setting is configured.
StarLab User Guide
63