Accton Wireless Broadband Corp. FIU176205000W Manuel D’Utilisation
System Configuration
5-40
5
clients that were retained in memory. Only new clients will require authentication.
(Default: Disabled)
(Default: Disabled)
• Submit – Enables the WPS configuration.
• Reset – Restores the previous WPS configuration information.
• Reset – Restores the previous WPS configuration information.
AP Security Information — Provides detailed WPS statistical information.
• WPS Configured – States if WPS for wireless clients has been configured for this
• WPS Configured – States if WPS for wireless clients has been configured for this
device. (Default: no)
• WPS Status – Displays if there is currently any WPS traffic connecting to the
wireless AP/Router. (Options: Start WSC Process; Idle; Default: Idle)
• SSID – The service set identifier for WLAN1. (Default: SMC)
• Auth Mode – The method of authentication used. (Default: Open)
• Encryption Type – The encryption type used for WLAN1. (Default: None)
• WPAPSK – Displays the pre-shared key if WPA/WPA2 has been enabled.
• Refresh – Refreshes the AP Security Information statistics.
• Auth Mode – The method of authentication used. (Default: Open)
• Encryption Type – The encryption type used for WLAN1. (Default: None)
• WPAPSK – Displays the pre-shared key if WPA/WPA2 has been enabled.
• Refresh – Refreshes the AP Security Information statistics.
WPS Config — Configures WPS settings for the wireless AP/Router.
• WPS Mode – The wireless AP/Router
• WPS Mode – The wireless AP/Router
can be set as a registrar (master) device
or an enrollee (client) device:
- as Registrar: When the wireless AP/Router is set as the registrar device, enter
or an enrollee (client) device:
- as Registrar: When the wireless AP/Router is set as the registrar device, enter
the PIN code/s of the enrollee device/s and click “start WPS Config" to add the
client/s to the network.
client/s to the network.
Note: When the wireless AP/Router is the registrar device, the enrollee device can join
the network by entering the wireless AP/Router’s PIN code “61773981.”
- as Enrollee: When the wireless AP/Router is set as the enrollee device, the
default PIN-Code for the unit is displayed. Click “start WPS Config" to join the
network.
network.
• WPS Config Method – Selects between
methods of broadcasting the WPS
beacon to network clients wanting to join
the network:
- PIN: The wireless AP/Router, along with other WPS devices, such as notebook
beacon to network clients wanting to join
the network:
- PIN: The wireless AP/Router, along with other WPS devices, such as notebook
PCs, cameras, or phones, all come with their own eight-digit PIN code. When
one device, the WPS enrollee, sends a PIN code to the wireless AP/Router, it
becomes the WPS registrar. After configuring PIN-Code information you must
press “start WPS Config" to send the beacon, after which you have up to two
minutes to activate WPS on devices that need to join the network.
one device, the WPS enrollee, sends a PIN code to the wireless AP/Router, it
becomes the WPS registrar. After configuring PIN-Code information you must
press “start WPS Config" to send the beacon, after which you have up to two
minutes to activate WPS on devices that need to join the network.
- PBC: This has the same effect as pressing the physical WPS button that is
located on the front of the wireless AP/Router. After checking this option and
clicking “Start WPS Config” you have up to two minutes to activate WPS on
devices that need to join the network.
clicking “Start WPS Config” you have up to two minutes to activate WPS on
devices that need to join the network.