OvisLink Corp. AIRMAX2 Manuel D’Utilisation

3. Configuring the AirMax2 

 

 

 

                       

AirLive AIRMAX2 User’s Manual 

 
 
 
 
 
 

 
The AirMax2 offers many different types of management interface.  You can configure 
through standard web browser (http), secured web (https), command line (telnet), sand 
ecured command shell (SSH).  In this chapter, we will explain AirMax2’s available 
management interfaces and how to get into them.     
 

The following information will help you to get start quickly.  However, we recommend you 
to read through the entire manual before you start.    Please note the password and SSID 
are case sensitive.     
 

‰ 

The default IP address is:    192.168.1.1   Subnet Mask: 255.255.255.0 

‰ 

The default user’s name is: admin 

‰ 

The default password is:      airlive 

‰ 

The default SSID is:       airlive 

‰ 

The default wireless mode is :    Client mode 

‰ 

After power on, please wait for 2 minutes for AirMax2 to finish boot up 

‰ 

Please remember to click on “Apply” for new settings to take effect 

‰ 

‰ 

The ClearSignal Technology is “OFF” by default.    If there are heavy interference 

around your environment.    Please turn it on.   

‰ 

When you change to “AP Router” mode, the LAN port will become WAN port.   

The IP address is changed to “192.168.2.1”. 

 

 

 

The AIRMAX2 can be managed remotely by a PC through either the wired or wireless 
network.    The default IP address of the AIRMAX2 is 192.168.1.1 with a subnet mask of  
255.255.255.0.  This means the IP address of the PC should be in the range of 
192.168.1.2 to 192.168.1.254.   

To prepare your PC for management with the AirMax2, please do the following: 

1.  Connect your PC directly to the LAN port on the DC Injector of AirMax2