TRL Technologies Inc. B8001900-1A Manuel D’Utilisation
The Front antenna should be positioned as close to, and with the best
unobstructed view to, where the cell phone would normally be used.
Avoid placing this antenna behind any metallic objects (ie. mirror in sun
visor). Do not make contact with any metal surface.
Connect Front antenna to amplifier unit.
Note
There is only one location where the Front antenna can be connected to amplifier unit.
o
Step 6. Achieve Optimal Enhancement
Once green or yellow LED light is obtained, permanently affix both the
Rear and Front antennas.
Rear and Front antennas.
If you are receiving a red LED even after trying different antenna
positions, try unplugging both antennas and turn the power off and on
again before plugging the antennas in. If the antennas are connected
and too close to each other when the amplifier is turned on, it will be
impossible to achieve a green LED until you do the preceding.
positions, try unplugging both antennas and turn the power off and on
again before plugging the antennas in. If the antennas are connected
and too close to each other when the amplifier is turned on, it will be
impossible to achieve a green LED until you do the preceding.
Two green LEDs – Optimal signal enhancement
One green, one yellow LED – Very good signal enhancement
Two yellow LEDs – Good signal enhancement
Any red LEDs – Poor signal enhancement
One green, one yellow LED – Very good signal enhancement
Two yellow LEDs – Good signal enhancement
Any red LEDs – Poor signal enhancement
Typical Installation