Medtronic MiniMed Inc. 7703 Manuel D’Utilisation
5
Note: A new AAA battery in the charger may charge the MiniLink over 40 times
before it needs to be replaced.
Charging the MiniLink
1 Insert the MiniLink into the charger. Line
1 Insert the MiniLink into the charger. Line
up the MiniLink connector (flat side down)
with the charger and push the two
components together fully.
with the charger and push the two
components together fully.
Note: The charger contains green and red
LEDs (lights).
2 When the MiniLink is first connected, the
charger’s green LED will blink rapidly for
1-2 seconds as charger powers on.
1-2 seconds as charger powers on.
3 As the MiniLink charges, the charger’s green LED will flash occassionally.
4 When charging is complete, the charger’s green LED will turn on for 15 to 20
seconds and then turn off. Once the LED is off, disconnect the MiniLink from
$JUHHQ/('VKRZV
FKDUJHULVZRUNLQJ
FKDUJHULVZRUNLQJ
$UHG/('DSSHDUVLI
FKDUJHUEDWWHU\QHHGV
UHSODFHPHQW25
WKHUHLV
DSUREOHP
ZLWKWKH
0LQL/LQN
EDWWHU\
FKDUJHUEDWWHU\QHHGV
UHSODFHPHQW25
WKHUHLV
DSUREOHP
ZLWKWKH
0LQL/LQN
EDWWHU\
DERXW
VHF
DERXW
VHF